Garage Doors for Every Taste

June 19, 2014

Properly Lubricating a Noisy Door



Our technicians do tune-ups thousands of times a year.. but you can do it too and perhaps prevent a problem. There are several things that must be considered when lubricating the garage door. 

First, it is not advisable to lubricate the parts of a squeaking garage door with WD40 lubricant. A good silicone spray is recommended when lubricating the garage door parts like the top part of the chain rail, stems, and hinges, metal rollers that come with ball bearings, the arm bar, and the lock. While there are components of the garage door that require lubrication, there are also parts that should not be sprayed with any lubricant like the bottom part of the chain rail, the chain, the garage door track, and the spring.

It's amazing what a little bit of preventative maintenance can do

June 5, 2014

How to Test Garage Door Reversal Function

Garage door safety has come a long way over the years, and one key feature of all modern garage doors is the automatic reversing feature.     

First, make sure your garage door opener has a reversing feature. It's easy to know... from the inside of the garage with the door closed you should notice two sensor "eyes" located about 6 inches above the ground on each side of the door jamb. (note: these usually have a visable red or green light)  Those sensors detect objects under the door and MUST be there and MUST be in working order.

Any garage door opener without this feature needs to be replaced. Garage door openers manufactured after January 1, 1993 are required by federal law to have advanced safety features which comply with the latest U.I. 325 standards.

Here's how to test the Reversal feature. (note - it's a good idea to do this every month or so).
  1. With the door fully open, place a full roll of paper towels on the floor in the center of the door.
  2. Push the remote control or wall button to close the door. The door must reverse when it strikes the roll of paper towels. (Note that the bottom part of 'one piece doors' must be rigid so that the door will not close without reversing).
  3. If the door does not reverse, have a certified technician adjust, repair or replace the sensors, the opener or the door.
Contact us for additional information. Seattle, Salt Lake, San Diego, Spokane